2.Remove the flange and mark on the wall the location that you wish the light
3.Pass the cable through the flange and connect to the appropriate connection on the terminal the Live and Neutral cables. The earth cabel is to be connected on the arm at the Earth marked terminal.
4.Use the plugs and screws provided in order to secure the flange on the wall .
5.Place arm on the flange and use the screws to scre the arm back on the flange , prior to fully screwing the screws ensure that the arm and thwe flange are aligned with therubber seal in order t ensure water tightness of the light .If the seal is not eve and in align with the flange and the arm water ingress may occur.
6.Install light bulbs of watts no more than the maximum watts allowed as indicated on the box.